View 14D101K_7727814.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

varistor specification tyee varistor varistor are voltage dependent, nonlinear device which have an electrical behavior similar to back-to-back zener diodes. tyee series zinc oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive. they are bilateral and symmetrical v-i characteristics curve and unparalleled large peak current capability are used for absorption of transient voltage, suppression of pulse noise and circuit voltage stabilization. applications features surge protection in consumer electronics fast response -- industrial electronics excellent voltage ratio -- telephone and telecommunication systems high stabilization for circuit voltage -- automobile equipments unparalleled absorption for transient voltage -- measuring and controller systems characteristics -- electronic home appliances bilateral and symmetrical v-i characteristics -- gas and petroleum appliances curve absorption of switching surge from various kinds of relays and electro-magnetic valves. electrostatic discharge an spike noise suppression. protection of various kinds of transistors, diodes, ics, thyristors, triac semiconductors, and etc. automobile control system such as transistorized ignition system and electronic fuel injection system, and etc. related standards ul1414, ul1449(2nd edition), csa, vde explanation of part numbers 05 d 2 2 0 element dia. type 05 5.0mm d examples k:10% 07 7.0mm 10 10.0mm 22 10 0 = 22v special 14 14.0mm 18 18.0mm 20 20.0mm 22 10 1 = 220v varistor voltage requirement tolerance k or customer 2 2 0 2 2 1 tyee products inc. http://www.tyeeusa.com page : 1/15
device ratings and characteristics 05d series part no. maximum maximum rated typical energy peak current power capacitance device (j) (8/20s) (@1khz) standards marking acrms(v) dc(v) min. vb(vdc) max. vc(v) ip(a) 10/1000s (a) (w) (pf) 05d180k 11 14 14.4 18 21.6 44 1 0.4 100 0.01 1600 05d220k 14 18 18.7 22 26.0 51 1 0.5 100 0.01 1500 05d270k 17 22 23.0 27 31.1 60 1 0.6 100 0.01 1450 05d330k 20 26 29.5 33 36.5 73 1 0.8 100 0.01 1400 05d390k 25 31 35 39 46 86 1 0.9 100 0.01 700 05d470k 30 38 42 47 55 104 1 1.1 100 0.01 650 05d560k 35 45 50 56 66 123 1 1.3 100 0.01 600 05d680k 40 56 61 68 80 150 1 1.6 100 0.01 580 05d820k 50 65 74 82 90 145 5 2.5 400 0.10 310 05d101k 60 85 90 100 110 175 5 3.0 400 0.10 290 05d121k 75 100 108 120 132 210 5 4.0 400 0.10 270 05d151k 95 125 135 150 165 260 5 4.8 400 0.10 240 05d181k 115 150 162 180 198 325 5 5.9 400 0.10 140 05d201k 130 170 185 200 225 355 5 6.5 400 0.10 120 05d221k 140 180 198 220 242 380 5 7.0 400 0.10 110 05d241k 150 200 216 240 264 415 5 8.0 400 0.10 110 05d271k 175 225 247 270 303 475 5 8.5 400 0.10 100 05d301k 195 250 270 300 330 505 5 9.0 400 0.10 100 05d331k 210 275 297 330 363 600 5 10.0 400 0.10 90 05d361k 230 300 324 360 396 620 5 10.0 400 0.10 80 05d391k 250 320 351 390 429 675 5 12.0 400 0.10 80 05d431k 275 350 387 430 473 745 5 13.0 400 0.10 70 05d471k 300 385 423 470 517 810 5 15.0 400 0.10 70 05d511k 320 410 459 510 561 880 5 15.0 400 0.10 65 05d561k 350 460 504 560 616 940 5 15.0 400 0.10 65 05d621k 385 505 558 620 682 1050 5 15.0 400 0.10 65 05d681k 420 560 612 680 748 1150 5 15.0 400 0.10 60 05d751k 460 615 675 750 825 1290 5 15.0 400 0.10 60 standard no. file no. symbols selection guide 1.determine the necessary steady-state voltage (working voltage). 2.establish the transient energy absorbed by the varistor 3.calculate the peak transient current through the varistor 4.determine power dissipation requirement. 5.select a model to provide the required voltage-clamping characteristics title application notes for ul recognized components related standards vde varistors for use in electronic equipment 21557-4790-001 accessories and parts for electronic products lr109736-1 ul 1449(2nd edition) transient voltage ul 1414 across-the-line components e165143 surge suppressors e150709 csa (@0.1ma) (8/20s) maximum allowable voltage varistor clamping voltage voltage @ test current tyee products inc. http://www.tyeeusa.com/ page:2/15
07d series part no. maximum maximum rated typical energy peak current power capacitance device (j) (8/20s) (@1khz) standards marking acrms(v) dc(v) min. vb(vdc) max. vc(v) ip(a) 10/1000s (a) (w) (pf) 07d180k 11 14 14.4 18 21.6 42 2.5 0.9 250 0.02 3800 07d220k 14 18 18.7 22 26.0 47 2.5 1.1 250 0.02 3600 07d270k 17 22 23.0 27 31.1 53 2.5 1.4 250 0.02 3400 07d330k 20 26 29.5 33 36.5 65 2.5 1.7 250 0.02 2900 07d390k 25 31 35 39 43 77 2.5 2.1 250 0.02 1600 07d470k 30 38 42 47 52 93 2.5 2.5 250 0.02 1550 07d560k 35 45 50 56 62 110 2.5 3.1 250 0.02 1500 07d680k 40 56 61 68 75 135 2.5 3.6 250 0.02 1200 07d820k 50 65 74 82 90 135 10 5.5 1200 0.25 860 07d101k 60 85 90 100 110 165 10 6.5 1200 0.25 750 07d121k 75 100 108 120 132 200 10 7.8 1200 0.25 530 07d151k 95 125 135 150 165 250 10 9.7 1200 0.25 410 07d181k 115 150 162 180 198 300 10 11.7 1200 0.25 300 07d201k 130 170 185 200 225 340 10 13.0 1200 0.25 250 07d221k 140 180 198 220 242 360 10 14.0 1200 0.25 250 07d241k 150 200 216 240 264 395 10 15.0 1200 0.25 240 07d271k 175 225 247 270 303 455 10 18.0 1200 0.25 220 07d301k 195 250 270 300 330 500 10 20.0 1200 0.25 190 07d331k 210 275 297 330 363 550 10 25.0 1200 0.25 180 07d361k 230 300 324 360 396 595 10 25.0 1200 0.25 170 07d391k 250 320 351 390 429 650 10 25.0 1200 0.25 160 07d431k 275 350 387 430 473 710 10 28.0 1200 0.25 150 07d471k 300 385 423 470 517 775 10 30.0 1200 0.25 130 07d511k 320 410 459 510 561 845 10 30.0 1200 0.25 120 07d561k 350 460 504 560 616 915 10 30.0 1200 0.25 120 07d621k 385 505 558 620 682 1025 10 30.0 1200 0.25 120 07d681k 420 560 612 680 748 1120 10 30.0 1200 0.25 110 07d751k 460 615 675 750 825 1240 10 33.0 1200 0.25 100 07d781k 485 640 702 780 858 1290 10 37.0 1200 0.25 90 07d821k 510 670 738 820 902 1355 10 40.0 1200 0.25 90 standard no. file no. symbols e165143 e150709 lr109736-1 21557-4790-001 varistors for use in components surge suppressors for electronic products electronic equipment title across-the-line transient voltage accessories and parts related standards ul 1414 ul 1449(2nd edition) csa vde voltage varistor clamping voltage voltage @ test current (@1ma) (8/20s) maximum allowable tyee products inc. http://www.tyeeusa.com/ page:3/15
10d series part no. maximum maximum rated typical energy peak current power capacitance device (j) (8/20s) (@1khz) standards marking acrms(v) dc(v) min. vb(vdc) max. vc(v) ip(a) 10/1000s (a) (w) (pf) 10d180k 11 14 14.4 18 21.6 39 5 2.1 500 0.05 16000 10d220k 14 18 18.7 22 26.0 43 5 2.5 500 0.05 11000 10d270k 17 22 23.0 27 31.1 53 5 3.0 500 0.05 8000 10d330k 20 26 29.5 33 36.5 65 5 4.0 500 0.05 6300 10d390k 25 31 35 39 43 77 5 4.6 500 0.05 5200 10d470k 30 38 42 47 52 93 5 5.5 500 0.05 4600 10d560k 35 45 50 56 62 110 5 7.0 500 0.05 3750 10d680k 40 56 61 68 75 135 5 8.2 500 0.05 2800 10d820k 50 65 74 82 90 135 25 12.0 2500 0.40 1920 10d101k 60 85 90 100 110 165 25 15.0 2500 0.40 1800 10d121k 75 100 108 120 132 200 25 18.0 2500 0.40 1500 10d151k 95 125 135 150 165 250 25 22.0 2500 0.40 1200 10d181k 115 150 162 180 198 300 25 27.0 2500 0.40 620 10d201k 130 170 185 200 225 340 25 30.0 2500 0.40 570 10d221k 140 180 198 220 242 360 25 32.0 2500 0.40 560 10d241k 150 200 216 240 264 395 25 35.0 2500 0.40 550 10d271k 175 225 247 270 303 455 25 40.0 2500 0.40 530 10d301k 195 250 270 300 330 500 25 42.0 2500 0.40 500 10d331k 210 275 297 330 363 550 25 47.0 2500 0.40 450 10d361k 230 300 324 360 396 595 25 47.0 2500 0.40 450 10d391k 250 320 351 390 429 650 25 60.0 2500 0.40 430 10d431k 275 350 387 430 473 710 25 65.0 2500 0.40 400 10d471k 300 385 423 470 517 775 25 70.0 2500 0.40 300 10d511k 320 410 459 510 561 845 25 70.0 2500 0.40 260 10d561k 350 460 504 560 616 915 25 70.0 2500 0.40 200 10d621k 385 505 558 620 682 1025 25 70.0 2500 0.40 170 10d681k 420 560 612 680 748 1120 25 70.0 2500 0.40 160 10d751k 460 615 675 750 825 1240 25 75.0 2500 0.40 150 10d781k 485 640 702 780 858 1290 25 80.0 2500 0.40 150 10d821k 510 670 738 820 902 1355 25 85.0 2500 0.40 150 10d911k 550 745 819 910 1001 1500 25 93.0 2500 0.40 140 10d102k 625 825 900 1000 1100 1650 25 102.0 2500 0.40 140 10d112k 680 895 990 1100 1210 1815 25 115.0 2500 0.40 130 standard no. file no. symbols e165143 e150709 lr109736-1 21557-4790-001 varistors for use in components surge suppressors for electronic products electronic equipment title across-the-line transient voltage accessories and parts related standards ul 1414 ul 1449(2nd edition) csa vde voltage clamping voltage @ test current (8/20s) varistor voltage (@1ma) maximum allowable tyee products inc. http://www.tyeeusa.com/ page:4/15
14d series part no. maximum maximum rated typical energy peak current power capacitance device (j) (8/20s) (@1khz) standards marking acrms(v) dc(v) min. vb(vdc) max. vc(v) ip(a) 10/1000s (a) (w) (pf) 14d180k 11 14 14.4 18 21.6 39 10 4.0 1000 0.1 25000 14d220k 14 18 18.7 22 26.0 43 10 5.0 1000 0.1 20000 14d270k 17 22 23.0 27 31.1 53 10 6.0 1000 0.1 16000 14d330k 20 26 29.5 33 36.5 65 10 7.5 1000 0.1 12200 14d390k 25 31 35 39 43 77 10 8.6 1000 0.1 7000 14d470k 30 38 42 47 52 93 10 10.0 1000 0.1 6750 14d560k 35 45 50 56 62 110 10 11.0 1000 0.1 6500 14d680k 40 56 61 68 75 135 10 14.0 1000 0.1 5500 14d820k 50 65 74 82 90 135 50 22.0 4500 0.6 4300 14D101K 60 85 90 100 110 165 50 28.0 4500 0.6 3500 14d121k 75 100 108 120 132 200 50 32.0 4500 0.6 2500 14d151k 95 125 135 150 165 250 50 40.0 4500 0.6 2100 14d181k 115 150 162 180 198 300 50 50.0 4500 0.6 1250 14d201k 130 170 185 200 225 340 50 57.0 4500 0.6 1150 14d221k 140 180 198 220 242 360 50 60.0 4500 0.6 1100 14d241k 150 200 216 240 264 395 50 63.0 4500 0.6 1050 14d271k 175 225 247 270 303 455 50 70.0 4500 0.6 1000 14d301k 195 250 270 300 330 500 50 73.0 4500 0.6 900 14d331k 210 275 297 330 363 550 50 93.0 4500 0.6 850 14d361k 230 300 324 360 396 595 50 93.0 4500 0.6 800 14d391k 250 320 351 390 429 650 50 100.0 4500 0.6 800 14d431k 275 350 387 430 473 710 50 115.0 4500 0.6 650 14d471k 300 385 423 470 517 775 50 125.0 4500 0.6 550 14d511k 320 410 459 510 561 845 50 125.0 4500 0.6 450 14d561k 350 460 504 560 616 915 50 125.0 4500 0.6 400 14d621k 385 505 558 620 682 1025 50 125.0 4500 0.6 350 14d681k 420 560 612 680 748 1120 50 130.0 4500 0.6 350 14d751k 460 615 675 750 825 1240 50 143.0 4500 0.6 330 14d781k 485 640 702 780 858 1290 50 148.0 4500 0.6 330 14d821k 510 670 738 820 902 1355 50 157.0 4500 0.6 330 14d911k 550 745 819 910 1001 1500 50 175.0 4500 0.6 300 14d102k 625 825 900 1000 1100 1650 50 190.0 4500 0.6 300 14d112k 680 895 990 1100 1210 1815 50 213.0 4500 0.6 200 14d182k 1000 1465 1620 1800 1980 2970 50 337.0 4500 0.6 150 standard no. file no. symbols e165143 e150709 lr109736-1 21557-4790-001 varistors for use in components surge suppressors for electronic products electronic equipment title across-the-line transient voltage accessories and parts related standards ul 1414 ul 1449(2nd edition) csa vde voltage (@1ma) (8/20s) maximum varistor clamping voltage allowable voltage @ test current tyee products inc. http://www.tyeeusa.com/ page:5/15
18d series part no. maximum maximum rated typical energy peak current power capacitance device (j) (8/20s) (@1khz) standards marking acrms(v) dc(v) min. vb(vdc) max. vc(v) ip(a) 10/1000s (a) (w) (pf) 18d180k 11 14 14.4 18 21.6 39 15 8.3 2000 0.15 36400 18d220k 14 18 18.7 22 26.0 43 15 10.4 2000 0.15 27300 18d270k 17 22 23.0 27 31.1 53 15 12.5 2000 0.15 22290 18d330k 20 26 29.5 33 36.5 65 15 15.6 2000 0.15 18200 18d390k 25 31 35 39 43 77 15 17.9 2000 0.15 12250 18d470k 30 38 42 47 52 93 15 20.8 2000 0.15 12280 18d560k 35 45 50 56 62 110 15 22.8 2000 0.15 11100 18d680k 40 56 61 68 75 135 15 29.1 2000 0.15 10460 18d820k 50 65 74 82 90 135 75 30.6 5500 0.8 7460 18d101k 60 85 90 100 110 165 75 38.9 5500 0.8 7280 18d121k 75 100 108 120 132 200 75 44.4 6500 0.8 5000 18d151k 95 125 135 150 165 250 75 55.6 6500 0.8 3820 18d181k 115 150 162 180 198 300 75 69.4 6500 0.8 2270 18d201k 130 170 185 200 225 330 75 79.2 6500 0.8 2100 18d221k 140 180 198 220 242 360 75 83.3 6500 0.8 2000 18d241k 150 200 216 240 264 395 75 87.5 6500 0.8 2000 18d271k 175 225 247 270 303 455 75 97.2 6500 0.8 1910 18d301k 195 250 270 300 330 500 75 101.4 6500 0.8 1630 18d331k 210 275 297 330 363 550 75 129.2 6500 0.8 1590 18d361k 230 300 324 360 396 595 75 129.2 6500 0.8 1540 18d391k 250 320 351 390 429 650 75 138.9 6500 0.8 1270 18d431k 275 350 387 430 473 710 75 159.7 6500 0.8 1220 18d471k 300 385 423 470 517 775 75 173.6 6500 0.8 1090 18d511k 320 410 459 510 561 845 75 175.0 6500 0.8 950 18d561k 350 460 504 560 616 915 75 177.8 6500 0.8 770 18d621k 385 505 558 620 682 1025 75 180.6 6500 0.8 510 18d681k 420 560 612 680 748 1120 75 182.0 6500 0.8 500 18d751k 460 615 675 750 825 1240 75 200.2 6500 0.8 480 18d781k 485 640 702 780 858 1290 75 207.2 6500 0.8 450 18d821k 510 675 738 820 902 1355 75 219.8 6500 0.8 450 18d911k 550 745 819 910 1001 1500 75 245.0 6500 0.8 430 18d102k 625 825 900 1000 1100 1650 75 266.0 6500 0.8 410 18d112k 680 895 990 1100 1210 1815 75 298.2 6500 0.8 360 18d182k 1000 1465 1620 1800 1980 2970 75 478.0 6500 0.8 260 standard no. file no. symbols e165143 e150709 lr109736-1 21557-4790-001 varistors for use in components surge suppressors for electronic products electronic equipment title across-the-line transient voltage accessories and parts related standards ul 1414 ul 1449(2nd edition) csa vde voltage (@1ma) (8/20s) maximum varistor clamping voltage allowable voltage @ test current tyee products inc. http://www.tyeeusa.com/ page:6/15
20d series part no. maximum maximum rated typical energy peak current power capacitance device (j) (8/20s) (@1khz) standards marking acrms(v) dc(v) min. vb(vdc) max. vc(v) ip(a) 10/1000s (a) (w) (pf) 20d180k 11 14 14.4 18 21.6 39 20 11.0 2000 0.2 40000 20d220k 14 18 18.7 22 26.0 43 20 14.0 2000 0.2 30000 20d270k 17 22 23.0 27 31.1 53 20 18.0 2000 0.2 24500 20d330k 20 26 29.5 33 36.5 65 20 23.0 2000 0.2 20000 20d390k 25 31 35 39 43 77 20 26.0 2000 0.2 13800 20d470k 30 38 42 47 52 93 20 33.0 2000 0.2 13500 20d560k 35 45 50 56 62 110 20 41.0 2000 0.2 12200 20d680k 40 56 61 68 75 135 20 46.0 2000 0.2 11500 20d820k 50 65 74 82 90 135 100 38.0 6500 1.0 8200 20d101k 60 85 90 100 110 165 100 45.0 6500 1.0 8000 20d121k 75 100 108 120 132 200 100 55.0 6500 1.0 5500 20d151k 95 125 135 150 165 250 100 70.0 6500 1.0 4200 20d181k 115 150 162 180 198 300 100 85.0 6500 1.0 2500 20d201k 130 170 185 200 225 340 100 95.0 6500 1.0 2300 20d221k 140 180 198 220 242 360 100 100.0 6500 1.0 2200 20d241k 150 200 216 240 264 395 100 108.0 6500 1.0 2200 20d271k 175 225 247 270 303 455 100 127.0 6500 1.0 2100 20d301k 195 250 270 300 330 500 100 150.0 6500 1.0 1800 20d331k 210 275 297 330 363 550 100 163.0 6500 1.0 1750 20d361k 230 300 324 360 396 595 100 163.0 6500 1.0 1700 20d391k 250 320 351 390 429 650 100 180.0 6500 1.0 1400 20d431k 275 350 387 430 473 710 100 190.0 6500 1.0 1350 20d471k 300 385 423 470 517 775 100 220.0 6500 1.0 1200 20d511k 320 410 459 510 561 845 100 220.0 6500 1.0 1050 20d561k 350 460 504 560 616 915 100 220.0 6500 1.0 850 20d621k 385 505 558 620 682 1025 100 220.0 6500 1.0 570 20d681k 420 560 612 680 748 1120 100 230.0 6500 1.0 550 20d751k 460 615 675 750 825 1240 100 255.0 6500 1.0 530 20d781k 485 640 702 780 858 1290 100 265.0 6500 1.0 500 20d821k 510 675 738 820 902 1355 100 282.0 6500 1.0 500 20d911k 550 745 819 910 1001 1500 100 310.0 6500 1.0 480 20d102k 625 825 900 1000 1100 1650 100 342.0 6500 1.0 460 20d112k 680 895 990 1100 1210 1815 100 383.0 6500 1.0 400 20d182k 1000 1465 1620 1800 1980 2970 100 625.0 6500 1.0 250 standard no. file no. symbols e165143 e150709 lr109736-1 21557-4790-001 varistors for use in components surge suppressors for electronic products electronic equipment title across-the-line transient voltage accessories and parts related standards ul 1414 ul 1449(2nd edition) csa vde voltage (@1ma) (8/20s) maximum varistor clamping voltage allowable voltage @ test current tyee products inc. http://www.tyeeusa.com/ page:7/15
dimension table unit:mm model symbol d(max.) 7.5 9.0 14.0 17.5 23.0 25.0 h(max.) 10.0 12.0 17.0 20.5 26.0 28.0 w(1.0) 5.0 5.0 7.5 7.5 7.5 10.0 l(min.) 25.0 25.0 25.0 25.0 25.0 25.0 d(0.02) 0.6 0.6 0.8 0.8 0.8 1.0 t(max). table unit:mm part no 05d 07d 10d 14d 18d 20d part no 05d 07d 10d 14d 18d 20d 180k 3.3 3.5 3.9 4.0 4.2 4.3 301k 3.9 4.1 4.3 4.4 4.6 4.7 220k 3.6 3.8 4.2 4.3 4.5 4.6 331k 4.0 4.2 4.5 4.6 4.8 4.9 270k 3.8 4.0 4.4 4.5 4.7 4.8 361k 4.1 4.3 4.7 4.8 5.0 5.1 330k 3.3 3.5 3.9 4.0 4.2 4.3 391k 4.2 4.4 4.8 4.9 5.1 5.2 390k 3.5 3.7 4.1 4.2 4.4 4.5 431k 4.4 4.6 5.0 5.1 5.3 5.4 470k 3.7 3.9 4.3 4.4 4.6 4.7 471k 4.6 4.8 5.2 5.3 5.5 5.6 560k 4.0 4.2 4.6 4.7 4.9 5.0 511k 4.8 5.0 5.3 5.4 5.6 5.7 680k 4.3 4.5 4.9 5.0 5.2 5.3 561k 5.0 5.2 5.5 5.6 5.7 5.9 820k 3.3 3.5 3.9 4.0 4.2 4.3 621k 5.3 5.5 5.7 5.8 6.0 6.1 101k 3.6 3.8 4.2 4.3 4.5 4.6 681k 5.4 5.6 5.8 5.9 6.1 6.2 121k 3.8 4.0 4.4 4.5 4.7 4.8 751k 5.6 5.8 6.0 6.1 6.3 6.4 151k 4.1 4.3 4.7 4.8 5.0 5.1 781k 5.8 6.0 6.3 6.4 6.6 6.7 181k 3.2 3.4 3.8 3.9 4.1 4.2 821k x 6.3 6.5 6.6 6.8 6.9 201k 3.3 3.5 3.9 4.0 4.2 4.3 911k x x 6.6 6.7 6.9 7.0 221k 3.4 3.6 4.0 4.1 4.3 4.4 102k x x 7.0 7.1 7.3 7.4 241k 3.5 3.7 4.1 4.2 4.4 4.5 112k x x 7.4 7.5 7.7 7.9 271k 3.7 3.9 4.2 4.3 4.5 4.6 182k x x x 11.5 11.7 11.9 packing quantity 2000 2000 20000 10000 6000 4000 10000 5000 3000 2000 1000 1000 500 500 min. q'ty(pcs) /carton part no. min. q'ty(pcs) / bags min. q'ty(pcs) /inner box 250 250 1000 1000 14dxxxk 18dxxxk 20dxxxk 05dxxxk 07dxxxk 10dxxxk dimension of standard products 18d 20d 05d 07d 10d 14d tyee products inc. http://www.tyeeusa.com/ page:8/15
crimped lead type unit:mm series symbol a max. varistor voltage 18v to 330v 13.0 15.0 19.5 22.5 30.5 v1ma(v) 360v to 1800v 13.0 15.0 20.5 23.5 32.0 dmax. 7.5 9.0 14.0 17.5 25.0 k 1.20.4 1.20.4 1.40.4 1.40.4 1.60.4 w 5.01.0 5.01.0 7.51.0 7.51.0 10.01.0 cl 5.00.5 5.00.5 5.00.5 5.00.5 5.00.5 d 0.6 0.6 0.8 0.8 1.0 symbol t : product thickness please refer to dimension of standard products packing quantity cut-off type i lead cut-off type ii lead cut-off type iii lead min. q'ty (pcs)/bags min. q'ty (pcs)/inner box min. q'ty (pcs)/carton -ttk -tti -tth 1000 15000 30000 -ttk -tti -tth 1000 15000 30000 -ttk -tti -tth 500 5000 10000 -ttk -tti -tth 500 3000 6000 n/a n/a n/a 250 1500 3000 n/a n/a n/a 250 1500 3000 type iii type ii type i 05d series 07d series 10d series 14d series 20d series 20dxxxk-tts 10dxxxk-tts 14dxxxk-tts 18dxxxk-tts cut-off straight lead 05dxxxk-tts 07dxxxk-tts tyee products inc. http://www.tyeeusa.com/ page:9/15
tape and reel fig. 05d 07d type i lead fig 1 05d 07d straight lead fig 2 10d type i lead fig 3 fig 4 14d type i lead fig 5 14d straight lead fig 6 taping product ordering information -trk -tri -trh -btk -bti -bth -trk -tri -trh -btk -bti -bth -trk -tri -trh -btk -bti -bth -trk -tri -trh outside inside crimped outside inside crimped kink kink kink kink 10d straight lead 10dxxxk-trs 14dxxxk-trs striaght lead striaght lead type i lead type ii lead type iii lead 05dxxxk-trs 05dxxxk-bts type iii lead tape & reel flax box 07dxxxk-trs type i lead type ii lead 07dxxxk-bts 10dxxxk-bts tyee products inc. http://www.tyeeusa.com/ page:10/15
05d series 07d series 14d series p pictch of component 12.7.1.0 12.7.1.0 12.7.1.0 15.0.1.0 25.4.1.0 p 0 feed hole pitch 12.7.0.2 12.7.0.2 12.7.0.2 15.0.0.2 25.4.0.2 p 1 feed hole center to lead 3.850.7 3.850.7 3.750.7 3.850.7 8.950.7 p 2 hole center to component center 6.350.7 6.350.7 - 7.51.3 12.70.7 f lead to lead distance 5.00.8 5.00.8 7.50.8 7.50.8 7.50.8 h component alignment 2.0 max 2.0 max 2.0 max 2.0 max 2.0 max 18.0+1.0 18.0+1.0 18.0+1.0 18.0+1.0 18.0+1.0 18.0-0.5 18.0-0.5 18.0-0.5 18.0-0.5 18.0-0.5 w 0 hold down tape width 5.0min. 5.0min. 5.0min. 5.0min. 5.0min. 9.0+0.75 9.0+0.75 9.0+0.75 9.0+0.75 9.0+0.75 9.0-0.50 9.0-0.50 9.0-0.50 9.0-0.50 9.0-0.50 w 2 hold down tape position 3.0max 3.0max 3.0max 3.0max 3.0max 18.0+2.0 18.0+2.0 18.0+2.0 18.0+2.0 18.0+2.0 18.0-0.0 18.0-0.0 18.0-0.0 18.0-0.0 18.0-0.0 h 0 seating plane height 16.00.5 16.00.5 16.00.5 16.00.5 16.00.5 h 1 component height 29.0max 32.0max 36.0max 36.0max 40.0max d 0 feed hole diameter 4.00.2 4.00.2 4.00.2 4.00.2 4.00.2 t total tape thickness 0.70.2 0.70.2 0.70.2 0.70.2 0.70.2 l leagth of clipped lead 11.0 max 11.0 max 11.0 max 11.0 max 11.0 max note: dimensions are in mm packing q'ty 180k~391k 2000 4000 16000 180k~621k 1000 10000 1 & 2 431k~821k 1500 3000 12000 681k~821k 800 8000 1 & 2 180k~391k 2000 4000 16000 180k~621k 1000 10000 1 & 2 431k~821k 1500 3000 12000 681k~821k 800 8000 1 & 2 180k~621k 1000 2000 8000 180k~621k 1000 8000 3 & 4 681k~112k 800 1600 6400 681k~112k 800 6400 3 & 4 180k~621k 1000 2000 8000 180k~621k 800 6400 1 & 2 681k~112k 800 1600 6400 681k~112k 600 4800 1 & 2 180k~391k 800 1600 6400 5 & 6 431k~621k 700 1400 5600 5 & 6 681k~112k 600 1200 4800 5 & 6 symbol parameter model size 10d series height from tape center to component base tape & reel (trk/tri/trh type) flat box (btk/bti/bth type) w tape width w 1 hole position 10d p12.7mm 14d 05d 07d 10d p15.0mm min.q'ty (pcs) /reel min.q'ty (pcs) /inner box fig dimension of taping product model no. model no. min.q'ty (pcs) /reel min.q'ty(pcs) /inner box min. q'ty (pcs) /carton h tyee products inc. http://www.tyeeusa.com/ page:11/15
1.standard packing bag unit:cm inner box dimension 05d to 10d series 10.5 14d to 20d series 19.5 label carton dimensions (height 21.5cm) part no. inspected by quantity lot no. 2.flat box 3.tape & reel symbol symbol aw bd ca unit:mm b unit:mm 90 05d 07d 10d 14d 55 45 l packing information 350max 30 05d~10d 340 max 55max 330max 20.3 24.1 18 l 27 44 26 tyee products inc. http://www.tyeeusa.com/ page:12/15
performance characteristics electrical classification ( nominal varistor voltage ) test voltage ( ac ) v 0.1 ma, v 1 ma Q 330v 1000 vrms v 0.1 ma, v 1 ma 330v 1500 vrms 05d180k to 05d680k 0.5a (2 ms) 05d820k to 05d471 k 20a ( 8/20 , 45 to 85 % rh. varistor voltage the voltage between two terminals with the specified measuring current cma dc applied is called vc or vcma . the measurement shall be made as fast as possible to avoid heat affection. to meet the specified value maximum allowable voltage the maximum sinusoidal rms voltage or maximum dc voltage that can be applied continuously in the specified environmental temperature range. clamping voltage the maximum voltage between two terminals with the specified standard impulse current (8/20 s) illustrated below applied. rated power the power that can be applied in the specified ambient temperature. maximum energy the maximum energy within the varistor voltage change of 10 % when one impulse of 2 ms or 10/1000 s is applied. maximum p eak current withstanding surge current 2 times the maximum current within the varistor voltage change of 10 % with the standard impulse current (8/20 s) applied two times with an interval of 5 minutes. 1 times the maximum current within the varistor voltage change of 10 % with the standard impulse current (8/20 s) applied one times. temperature coefficient of varistor voltage 100 ( %/ ) - 0.05 %/ max capacitance capacitance shall be measured at 1 khz 10 %, 1vrms max . 0v bias and 202 to meet the specified value withstanding voltage ( body insulation ) the specified voltage shall be applied both terminals of the specimen connected together and metal foil closely wrapped round its body for 1 minute. electrical breakdown shall be examined. no breakdown impulse life i the change of vc shall be measured after the impulse listed below is applied 10000 times continuously with the interval of ten seconds at room temperature . v cma / v cma Q 10% 5 series 7 series 20 series note: varistor voltage change of forward direction shall be measured in the test of uni-pole surge life and dc load life 10 series 14 series vc at 85 vc at 25 vc at 25 1 60 tyee products inc. http://www.tyeeusa.com/ page: 13/15
electrical 05d180k to 05d680k 0.45a (2 ms) 05d820k to 05d471k 14a (8/20 s) 07d180k to 07d680k 12a (8/20 s) 07d820k to 07d471k 35a (8/20 s) 10d180k to 10d680k 35a (8/20 s) 10d820k to 10d471k 70a (8/20 s) 14d180k to 14d680k 45a (8/20 s) 14d820k to 14d471k 90a (8/20 s) 20d180k to 20d680k 55a (8/20 s) 20d820k to 20d471k 100a (8/20 s) mechanical approximately 95% of the terminals shall be covered with solder uni-formly resistance to soldering heat after each lead shall be dipped into a solder bath having a temperature 2605 (3 series: 2505 ) to a point 2.0 to 2.5 mm from the body of the unit, using shieldig board (t=1.5mm), be held there for specified time (3series: 31 s, 5 series: 51 s and others: 101 s ), and then be stored at room temperature and humidity for 1 to 2 hours. the change of vc and mechanical damages are examined. vcma/vcma Q 5% no outstanding damage vibration after repeadly applying a single harmonic vibration (amplitude: 0.75 mm) double amplitude:1.5mm with 1 minute vibration frequency cycles (10 hz to 55 hz to 10 hz) to each of three perpendicular directions for 2 hours. thereafter, the unit shall be visually examined. solderadilty after dipping the terminals to a depth of approximately 3mm from the body in a soldering bath of 2355 for 20.5 seconds, the terminal shall be visually examined. robustness of terminations (bending) the unit shall be secured with its terminal kept vertical and the force specified below be applied in the axial direction. the terminal shall gradually be bent by 90 in one direction, then 90in the opposite direction, and again back to the original position. the damage of the terminal shall be visually examined. terminal diameter force ? 0.6 mm 4.9 n 0.5kgf ? 0.8 mm 4.9 n 0.5kgf ? 1.0 mm 9.8 n 1.0kgf characteristics test methods specifications robustness of terminations (tensile) after gradually applying the force specified below and keeping the unit fixed for the seconds, the terminal shall be visually examined for any damage. no outstanding damage terminal diameter force ? 0.6 mm 9.8 n 1.0kgf ? 0.8 mm 9.8 n 1.0kgf ? 1.0 mm 19.6 n 2.0kgf 20 series note: varistor voltage change of forward direction shall be measured in the test of uni-pole surge life and dc load life 10 series 14 series characteristics test methods specifications impulse life ii the change of vc shall be measured after the impulse listed below is applied 100000 times continuously with the interval of ten seconds at room temperature . vcma/vcma Q 10% 5 series 7 series tyee products inc. http://www.tyeeusa.com/ page:14/15
environmental step 2 15 3 4 15 3 characteristics test methods specifications high temperature storage/ dry heat the specimen shall be subjected to 1252 for 1000 hours in a thermostatic bath without load and then stored at room temperature and humidity for 1 to 2 hours. thereafter, the change of vc shall be measured. vcma/vcma Q 5% damp heat/ humidity (steady state) the specimen shall be subjected to 40 2 , 90 to 95 %rh for 1000 hours without load and then stored at room temperature and humidity for one to two hours. thereafter, the change of vc shall be measured. temperature cycle the temperature cycle shown below shall be repeated five times and then stored at room temperature and humidity for one to two hours. the change of vc and mechanical damage shall be examined. temperature( ) period (minutes) 1 -40 3 30 3 room temperature 3 125 2 30 3 room temperature high temperature load/ dry heat load after being continuously applied the maximum allowable voltage at 85 2 for 1000 hours. the specimen shall be stored at room temperature and humidity for one to two hours thereafter, the change of vc shall be measured. low temperature storage/cold the specimen shall be subjected to -402 without load for 1000 hours and then stored at room temperature for one to two hours. thereafter, the change of vc shall be measured. vcma/vcma Q 5% vcma/vcma Q 10% damp heat load/ humidity load the specimen shall be subjected to 402 , 90 to 95 %rh and the maximum allowable voltage for 1000 hours and then stored at room temperature and humidity for one to two hours. thereafter, the change of vc shall be measured. vcma/vcma Q 10% tyee products inc. http://www.tyeeusa.com/ page: 15/15

▲Up To Search▲

Price & Availability of 14D101K

	To Download 14D101K Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .